The Case Of The Lost Rx.

Utilizing shop or job trays is a great way to keep track of a patient’s Rx from initial selection to final dispensing. Use the tray to hold the frame and case, critical paperwork, screws and findings, lenses, and more. Helps keep you organized as patient information is readily accessible.

Trays interlock for secure stacking and transporting. The large tray tag slot makes it easy to locate the patient’s tray and helps keep the tray looking clean and professional. Extra sturdy laboratory/dispensing trays are available in six colors.

These trays also interlock with our Click 'n Stack Extra Deep Job Trays.

Trays are packaged 12 or 24 per single color case. 6-1/8" W x 1-5/8" H x 9-1/8" D

See other options below, or view all Trays and Tool Holders

Available in cases of 20 trays, and in five contemporary colors: Yellow, White, Red, Green, and Blue

These 2-1/4” deep trays accommodate wrap around frames and the larger eyeglass cases. Once assembled they stack securely with each other and with standard 6" x 9" trays. The base of the tray has indentations for capturing small parts and the face has a tray tag holder. To save you money on shipping we designed the trays to nest one inside the other with the sides removed. The tray is easily assembled by snapping the sides into place.

These trays also interlock with our Plastic Stackable Shop Trays.

Not returnable once assembled.

Trays are packaged 20 trays per single color. 6"W x 2-1/4"H x 9"D

#2140/20 – Yellow - Click 'n Stack Extra Deep Job Trays $59.95

#2142/20 – White - Click 'n Stack Extra Deep Job Trays $59.95

#2144/20 – Red - Click 'n Stack Extra Deep Job Trays $59.95

#2146/20 – Green - Click 'n Stack Extra Deep Job Trays $59.95

#2148/20 – Blue - Click 'n Stack Extra Deep Job Trays $59.95

See other tray options below, or view all Trays and Tool Holders 

Insider Info from Joshua

"Here is an annoying problem. Shop tray shipping cartons are big, bulky and lightweight. Decades ago this wasn’t a problem as dimensional weight wasn’t even a thing. Now a case of stacking shop trays which weights 10 actual pounds is billed at 16 pounds dimensional weight. We sell a lot of trays overseas where this problem gets much worse. It can cost more to ship a case of trays than the trays themselves cost. To eliminate this issue while coming up with a deeper tray to hold wrap around frames and cases I designed the Click ‘n Stack trays. The sides are shipped separated from the body so the trays nest until assembled. It weighs 10 pounds and you pay only for 10 pounds in shipping." 

Keep your shop trays looking clean, professional and organized.

100 white plastic tags with dry erase marker. 3-1/4" W x 1" H.

* Pen color will vary

See other options below, or view all Trays and Tool Holders

Keep your shop trays looking clean, professional and organized.

500 white card stock tags. Use twice and discard. Packaged in cardboard box. 3-1/4" W x 1" H.

See other options below, or view all Trays and Tool Holders

Flexible steel with engraved millimeter scales.

Tapered end fits into eyewire groove for accurate readings. 6-1/4" long by 15/32" wide.

Rules To Abide By

"A PD rule can be much more than a simple measuring stick. Check out the features on our selection of rules. You will surely find one that makes your dispensing or lab task easier and more accurate. All American made where a 70mm reading on the scale is 70mm in reality."

See other options below, or view all PD Rules

Sturdy white plastic with both millimeter and inch scales in black.

Beveled for comfort. 6-1/4" long by 37/64" wide.

Rules To Abide By

"A PD rule can be much more than a simple measuring stick. Check out the features on our selection of rules. You will surely find one that makes your dispensing or lab task easier and more accurate. All American made where a 70mm reading on the scale is 70mm in reality."

See other options below, or view all PD Rules

Sturdy white plastic with both millimeter and inch scales in black.

Millimeter markings read in the same direction for accurate PD measurements. 7-1/4" long by 11/16" wide.

Rules To Abide By

"A PD rule can be much more than a simple measuring stick. Check out the features on our selection of rules. You will surely find one that makes your dispensing or lab task easier and more accurate. All American made where a 70mm reading on the scale is 70mm in reality."

See other options below, or view all PD Rules

Sturdy red plastic with both millimeter and inch scales in white.

The ends of this rule are notched for easy and accurate eyewire measurements. White numbers on red field run in opposition so that the rule always reads in the correct direction. 7-1/4" long by 11/16" wide.

Rules To Abide By

"A PD rule can be much more than a simple measuring stick. Check out the features on our selection of rules. You will surely find one that makes your dispensing or lab task easier and more accurate. All American made where a 70mm reading on the scale is 70mm in reality."

See other options below, or view all PD Rules

Your work will go faster if all your frequently used tools are all in one place.

To get you organized use our functional and attractive countertop rack. Holds pliers, drivers, files, rules, lens clock and eight vials of screws, blades, etc. Made of clear acrylic. Tools not included. 11" W x 6" H x 6" D.

See other options below, or view all Trays and Tool Holders

Bubble. Bubble. Less Toil And Trouble.

This is the added dimension in customer care. A three minute soak in this ultrasonic bath will rejuvenate eyewear. High intensity scrubbing power lifts dirt and grime from eyewires, around nose pads and frame surfaces. Three minute automatic shut-off and stainless steel tank. 42,000Hz energy wave output frequency at 35 watts. ETL approved. Outer housing: 5-1/2" W x 5" H x 8" D. Tank: 3-3/4" W x 1-5/8" H x 6" D. 115 volts.

See other options below, or view all Ultrasonic Cleaner Products

Curves Worth Knowing.

The higher the patient’s Rx, the more important the base curve be specified in the Rx. A dramatic change in the curvature can cause the patient problems. This clock provides precise curvature measurements on glass and plastic lenses. Rounded steel tips prevent scratched lenses. +\-20 diopters. Self-adjustable re-calibration.

A great, versatile, compact work station. Provides an angled rubber surface on which to place a frame when inserting eyewire and hinge screws or making general repairs. Stop hunching over a rubber bench block and begin working comfortably on top of your tabletop. The “third hand” feature of the Bench Anvil Kit includes three nut wrenches, one Phillips/flat screwdriver blade, riveting and cupping points and solid anvil. 6" W x 5" H x 5" D.

Insider Info from Joshua

"I was at a friend’s dispensary in Southern California. She featured a lot of drill through rimless and was working on mounting a lens and asked if I could hold the hex nut driver while she tightened a screw. “What would you do if I wasn’t here?” I asked. “I’d wrestle with it and maybe scratch the lens before I gave up and waited for a second set of hands”. The rest is history. Think of all the times you ask a coworker to help you with an adjustment and instead use this little work station. Except of course for spring hinge frames, we already have something better for that." 

It’s Your Solution.

Ultrasonics clean by compressing and releasing water molecules to scrub dirt particles loose. Use this surfactant to improve the scrubbing action and reduce the friction between water molecules. You’ll see better cleaning results faster. Use only a few drops per tank. 4 ounce concentrate.

See other options below, or view all Ultrasonic Cleaners

A compact flexible case designed to comfortably hold six pliers and plenty of drivers.

Made of sturdy canvas with a hand carrying strap. Measures approximately 13-3/4" W x 12" H when open and only 3-1/2" W x 12" H when rolled closed. Tools not included.

See other options below, or view all Trays and Tool Holders

Now take digital vertical pupillary height readings!

The DigiOmeter provides digital accuracy when measuring interpupillary distance (PD), vertex and pupillary height readings. Measurement options include binocular PD and right/left monocular PD, vertex distance readings PLUS digitally accurate pupillary height readings for multifocal Rx!

This instrument measures the distance between the pupils and from the eyewire to the pupil, by focusing the spot of light reflecting off of the patient’s retina. Using a highly accurate linear sensor, the reflection is bisected vertically or horizontally to take the reading. This pupilometer features an easily visible wide-angle LCD numeric readout. It’s easy, user friendly functions eliminate operator error and increases measuring accuracy.

SPECS

Data range – Binocular PD 46-82mm, Monocular PD 23-41mm
Distance Range – 300-infinity
Indication, Rounding and Asymmetric Error – <.5mm
Power Source – DC3V (two AA batteries)
Automatic Off – After 2 minutes on standby
Size – 232mm length x 163mm width x 71mm height
Weight – 28 oz.

Cleverly holds twelve pliers in addition to a lens clock, files and five drivers.

Velcro strips hold pliers in place so you can have freedom of arrangement. Pockets hold lens clock, files and drivers.

Zipper closure and convenient carrying handle. Vinyl exterior. Tools not included. 21-3/4" W x 12" D open.

See other options below, or view all Trays and Tool Holders

Looking For Stress?

There are many reasons to check for stress in mounted lenses. Too much stress on a lens may not manifest itself until the day your patient exits a warm office building into sub-freezing temperatures and the lens implodes. Aside from viewing stress patterns you can determine axis in polarized lenses. This is a compact bench top model that you can hold in your hand. Operates using two AA batteries (included). 2-3/4" W x 2-3/4" H x 4" D.

See other options below, or view all Bench Aids

Dispensary scaled version constructed of corrosion resistant brass and stainless steel.

Has deep jaws for use on lenses up to 86mm in diameter and 15mm thick. Scale is in 10th millimeter increments. Soft spring and Delrin plastic tipped jaws protect the lens.

7-3/8" long.

Reclaim your limited counter space by using our stylish white and silver magnetic tool bar.

Dual strong magnets grip tools securely. Mounting screws provided. Tools not included.

12" long.

See other options below, or view all Trays and Tool Holders

Three rules PLUS a pinhole occluder.

Use the scales on this rule to measure binocular PD, monocular PD, seg height, bridge, DBL of frame and eyewire A and B dimensions. A pinhole occluder tests visual acuity. 7-3/8" long by 1" wide.

Rules To Abide By

"A PD rule can be much more than a simple measuring stick. Check out the features on our selection of rules. You will surely find one that makes your dispensing or lab task easier and more accurate. All American made where a 70mm reading on the scale is 70mm in reality."

See other options below, or view all PD Rules