Side Cutting Pliers

Oblique Head End Cutting Plier for Hard Metals – Premium Model #2025V, Black Vinyl Handle

Oblique Head End Cutting Plier for Hard Metals – Premium Model #2025F, Green Foam Handle

Oblique Head End Cutting Plier for Hard Metals – Premium Model – Close Up

Oblique Head End Cutting Plier for Hard Metals – Premium Model #2025

#2025V

$35.95

Play It Safe.

Years ago, all eyewear screws were made from soft “pot metal”. Ordinary cutters could do a sufficient job and last several years. Nowadays, you don’t know if you are going to be cutting a pot metal screw or a hard stainless steel screw. If your cutter is not tempered to be harder than stainless it will develop divots and ruin the cutting edges. To play it safe, use this end cutter to slice through any screw you encounter. The 22mm cutting edge is angled and tapered to a fine point. Made of tempered carbon stainless steel.

#2025V – Black Vinyl Handle

#2025F – Green Foam Handle

See other models of this plier below. View all End Cutting Pliers

Side Cutting Plier – Premium Model #2026V, Black Vinyl Handle

Side Cutting Plier – Premium Model #2026F, Green Foam Handle

Side Cutting Plier – Premium Model #2026

#2026V

$35.95

Cutters for soft metals can be scaled down and have the advantage of being able to get into tighter spaces on a frame.

The head is tapered to a fine point. The smaller scale means, however, that the cutting edge is not appropriate for hard metals.

#2026V – Black Vinyl Handle

#2026F – Green Foam Handle

See other models of this plier below. View all Side Cutting Pliers

Side Cutting Plier – Budgetool Model #3026V, Grey Vinyl Handle

Side Cutting Plier – Budgetool Model #3026F, Green Foam Handle

Side Cutting Plier – Budgetool Model #3026

#3026V

$27.95

Cutters for soft metals can be scaled down and have the advantage of being able to get into tighter spaces on a frame.

The head is tapered to a fine point. The smaller scale means, however, that the cutting edge is not appropriate for hard metals.

#3026V – Grey Vinyl Handle

#3026F – Green Foam Handle

See other models of this plier below. View all Side Cutting Pliers

Oblique Head End Cutting Plier – Budgetool Model #3024V, Grey Vinyl Handle

Oblique Head End Cutting Plier – Budgetool Model #3024F, Green Foam Handle

Oblique Head End Cutting Plier – Budgetool Model #3024

#3024V

$27.95

Cutters for soft metals can be scaled down and have the advantage of being able to get into tighter spaces on a frame.

The head is tapered to a fine point. The smaller scale means, however, that the cutting edge is not appropriate for hard metals.

#3024V – Grey Vinyl Handle

#3024F – Green Foam Handle

See other models of this plier below. View all End Cutting Pliers

Narrow Flush End Cutting Plier – Guild Model #1027V, Black Vinyl Handle

Narrow Flush End Cutting Plier – Guild Model #1027F, Green Foam Handle

Narrow Flush End Cutting Plier – Guild Model – Close Up

Narrow Flush End Cutting Plier – Guild Model #1027

#1027V

$38.95

Ready. Set. Snip.

You have replaced the plastic tubing in a compression rimless. Excess tubing is extending beyond the lens surface. Cutting the bushing down close to the lens will produce a tighter and stronger compression fit. Using a razor poses a danger to both fingers and lenses. Instead, reach for this plier to safely trim tubing. Rounded jaws prevent scratching the lens. 5mm wide head. Use only on plastic compression rimless tubing.

#1027V – Black Vinyl Handle

#1027F – Green Foam Handle

See other models of this plier below. View all End Cutting Pliers and Rimless Related Products